BEKOMAT 12 CO PN63 electronic condensate drain, 230 VAC, 0.8–16 bar(g), 1.43 l/h
Type: BEKOMAT 12 CO PN63, 230 VAC
Condensate drain max. capacity (blue zone): compressor 6.5 m3/min refrigeration dryer 13 m3/min filter 65 m3/min.
Operating temperature: +1…+60 °C
Operating pressure: 1.2-63 bar,g
Condensate inlet connection: G1/2″ male
Condensate drain connection: G3/8″ UK.
Suitability: For removing oily and oil-free condensate.
Manufacturer: BEKO TECHNOLOGIES GmbH
Condition: Free with supplier
Delivery time: 3–5 business days, subject to intermediate sales reservations
1004,00 € (VAT 0%)
Additional information
BEKOMAT 12 CO PN63 is an electronically level-controlled condensate drain for compressed air systems. A capacitive sensor monitors the level of the condensate and automatically drains the condensate without unnecessary loss of compressed air. BEKOMAT 12 CO PN63 is suitable for compressors, refrigeration dryers, filters, water separators and other condensate drains in compressed air systems. The device is suitable for draining oily condensate.
Installation and use
BEKOMAT 12 CO PN63 is installed at the point where condensation water is formed, such as a compressor, compressed air filter, water separator or dryer condensate drain. The condensate must be able to flow freely to the drain. The device operates automatically according to the level. A capacitive sensor detects accumulated condensation water and controls the drain valve so that the condensation water is removed without unnecessary loss of compressed air. The TEST button can be used to check the operation of the drain valve. The correct installation position, operating pressure and the dimensioning of the inlet and outlet piping must be taken into account during installation. Installation and commissioning are carried out in accordance with the manufacturer's operating instructions.
Note: No harmful back pressure must be created in the condensate drain pipe. Oily condensate must be treated in accordance with applicable environmental requirements.
Service and maintenance
BEKOMAT 12 CO PN63 is designed to require little maintenance. It is recommended to check the operation of the device and the unobstructed drainage of condensate regularly. The operation can be checked with the TEST button. During maintenance, the connections, the discharge pipework and any impurities are also checked. Maintenance and repair work is carried out on a depressurized and de-energized device in accordance with the manufacturer's instructions.
Warranty
The manufacturer's warranty is 24 months. The warranty covers material and manufacturing defects and requires proper installation, use and maintenance of the product in accordance with the manufacturer's instructions.
Installation service
Installation service available, starting at €99 (VAT 0 %) in the Tampere area.
